<\/p>\n
Royal Flex, <\/strong>improved cementitious adhesive, for laying ceramic tiles, porcelain stoneware and stone material (as long as it is not sensitive to humidity), on floors and\/or coatings.<\/p>\n <\/p>\n Classified according to UNI EN 12004 (C2TES1)<\/strong>: Cement adhesive<\/strong> with improved adhesion<\/strong>, extended open time<\/strong>, reduced slip<\/strong> and deformable properties<\/strong>.<\/p>\n <\/p>\n It can be used, both internally and externally<\/strong>, for laying ceramic floors of any type, on various substrates such as cement screeds<\/strong>, heated floors<\/strong>, self-levelling<\/strong>, plasters<\/strong>, and even waterproofing products<\/strong> of the Winkler range such as WINGRIP BITUMINOSO<\/strong> and WINFLEX CEMENT<\/strong>.<\/p>\n <\/p>\n Thanks to its deformability (S1)<\/strong>, it supports substrate and coating movement very well, without causing the tile to be debonding.<\/p>\n <\/p>\n It can be applied with thicknesses from 3mm up to 10mm<\/strong>, without a previous bedding applied.<\/p>\n <\/p>\n For large-format coverings<\/strong> (with an area greater than 900 cm\u00b2<\/strong>) or whenever a \u201cfull bed\u201d application<\/strong> is required according to the UNI EN 11493-1<\/strong> standard, ROYAL FLEX<\/strong> must be laid following the technique called \u201cdouble spreading<\/strong>\u201d or \u201cback-buttering<\/strong>\u201d, which means spreading it on the back of the tile<\/strong> or stone to ensure complete coverage<\/strong> and a greater adhesion<\/strong> to the support.<\/span><\/span><\/p>\n Make sure that the application surfaces are clean<\/strong>, free from salts<\/strong> and crumbly parts<\/strong>. Check that the substrate is consistent<\/strong>, that it has undergone the correct curing<\/strong>, does not present any lesions<\/strong> and that it complies with the requirements indicated in the UNI EN 11493-1<\/strong> standard.<\/p>\n <\/p>\n Apply at temperatures between +5\u00b0C and +35\u00b0C<\/strong>. For substrates with irregularities greater than 10 mm<\/strong>, use WINLIVEL<\/strong> or WINLIVEL RAPID<\/strong> self-levelling products. On vertical surfaces<\/strong> use WR05-WINTONAC<\/strong>.<\/p>\n <\/p>\n In case of substrates difficult to wet<\/strong>, such as pre-existing ceramics<\/strong>, for overcoating<\/strong>, after careful cleaning<\/strong>, apply WINGRIP EVO<\/strong> (see technical data sheet), at the rate of 300 g\/m\u00b2<\/strong>, and wait two hours<\/strong> before finally proceeding with the application.<\/p>\n <\/p>\n To lay a screed, use WINPLAN 370<\/strong>, a quick-drying screed<\/strong> or WINPLAN PRO<\/strong>, a quick-drying screed with low water absorption<\/strong>.<\/p>\n Store at temperatures between +5\u00b0C and +35\u00b0C<\/strong>. <\/span><\/span><\/p>\n Accessories<\/strong>:<\/span><\/span><\/p>\n <\/p>\n Royal Flex, <\/strong>improved cementitious adhesive, for laying ceramic tiles, porcelain stoneware and stone material (as long as it is not sensitive to humidity), on floors and\/or coatings.<\/p>\n <\/p>\n Classified according to UNI EN 12004 (C2TES1)<\/strong>: Cement adhesive<\/strong> with improved adhesion<\/strong>, extended open time<\/strong>, reduced slip<\/strong> and deformable properties<\/strong>.<\/p>\n <\/p>\n It can be used, both internally and externally<\/strong>, for laying ceramic floors of any type, on various substrates such as cement screeds<\/strong>, heated floors<\/strong>, self-levelling<\/strong>, plasters<\/strong>, and even waterproofing products<\/strong> of the Winkler range such as WINGRIP BITUMINOSO<\/strong> and WINFLEX CEMENT<\/strong>.<\/p>\n","protected":false},"featured_media":1777,"template":"","meta":{"_et_pb_use_builder":"off","_et_pb_old_content":"Improved cementitious adhesive<\/strong>, for laying ceramic tiles<\/strong>, porcelain stoneware<\/strong> and stone material<\/strong> (as long as it is not sensitive to humidity), on floors and\/or coatings. Classified according to UNI EN 12004 (C2TES1)<\/strong>: Cement adhesive with improved adhesion<\/strong>, extended open time<\/strong>, reduced slip<\/strong> and deformable properties<\/strong>. It can be used, both internally and externally, for laying ceramic floors<\/strong> of any type, on various substrates such as cement screeds<\/strong>, heated floors<\/strong>, self-levelling<\/strong>, plasters<\/strong>, and even waterproofing products<\/strong> of the Winkler range such as WINGRIP BITUMINOSO<\/strong> and WINFLEX CEMENT<\/strong>. Thanks to its deformability (S1<\/strong>), it supports substrate and coating movement<\/strong> very well, without causing the tile to be debonding. It can be applied with thicknesses from 3mm up to 10mm<\/strong>, without a previous bedding applied. \r\n
\nicon_check icon<\/span> Data Sheet icon_documents_alt icon<\/span><\/span><\/a><\/h6>\n
\nicon_check icon<\/span> Certifications icon_link_alt icon<\/span><\/span><\/a><\/h6>\n
\nicon_check icon<\/span>Declarations Of Performance icon_documents_alt icon<\/span><\/span><\/a><\/h6>\n
\n<\/div>\nAPPLICATION <\/span><\/h4>\n
\nThe product must be applied with a notched trowel<\/strong>.<\/span><\/span><\/p>\n
\nUSEFUL TIPS\/SURFACE PREPARATION <\/span><\/h4>\n
\nCONSUMPTIONS <\/span><\/h4>\n
\n
\nPACKAGES <\/span><\/h4>\n
\n
\nCOLORS <\/span><\/h4>\n
\n
\nSTORAGE <\/span><\/h4>\n
\nThe product, in its undamaged packaging<\/strong> and stored in a cool and dry place<\/strong>, has a shelf-life of 12 months<\/strong>. <\/span><\/span><\/p>\n\n
\r\n\r\n<\/span> technical data sheet h<\/span> <\/a><\/h6>\r\n\r\n
\r\n\r\n<\/span> performance declaration h<\/span> <\/a><\/h6>\r\n\r\n
\r\n\r\n certifications \ue03c<\/span> <\/a> <\/h6>\r\n\r\n
\r\n\r\n<\/div>\r\nApplication<\/h4>\r\nThe product must be applied with a notched trowel<\/strong>. For large-format coverings<\/strong> (with an area greater than 900 cm\u00b2) or whenever a \u201cfull bed\u201d application is required according to the UNI EN 11493-1<\/strong> standard, ROYAL FLEX must be laid following the technique called \u201cdouble spreading\u201d<\/strong> or \u201cback-buttering\u201d<\/strong>, which means spreading it on the back of the tile or stone to ensure complete coverage<\/strong> and a greater adhesion to the support.\r\n\r\n
\r\n\r\nUseful tips - surface preparation<\/h4>\r\nMake sure that the application surfaces<\/strong> are clean, free from salts<\/strong> and crumbly parts<\/strong>. Check that the substrate is consistent<\/strong>, that it has undergone the correct curing<\/strong>, does not present any lesions<\/strong> and that it complies with the requirements indicated in the UNI EN 11493-1<\/strong> standard. Apply at temperatures between +5\u00b0C and +35\u00b0C<\/strong>. For substrates with irregularities greater than 10 mm<\/strong>, use WINLIVEL<\/strong> or WINLIVEL RAPID<\/strong> self-levelling products. On vertical surfaces use WR05-WINTONAC<\/strong>. In case of substrates difficult to wet, such as pre-existing ceramics, for overcoating, after careful cleaning, apply WINGRIP EVO<\/strong> (see technical data sheet), at the rate of 300 g\/m\u00b2<\/strong>, and wait two hours before finally proceeding with the application. To lay a screed, use WINPLAN 370<\/strong>, a quick-drying screed or WINPLAN PRO<\/strong>, a quick-drying screed with low water absorption.\r\n\r\n
\r\n\r\nConsumptions<\/h4>\r\nTotal consumption: 1.1 - 1.3 kg\/m\u00b2 mm<\/strong> of thickness.\r\n\r\n
\r\n\r\nPackages<\/h4>\r\n25 kg bags<\/strong> - 60 bags for pallet<\/strong>.\r\n\r\n
\r\n\r\nColours<\/h4>\r\nWhite<\/strong> - grey<\/strong>\r\n\r\n
\r\n\r\nStorage<\/h4>\r\nThe product, in its undamaged packaging and stored in a cool and dry place<\/strong>, has a shelf-life of 12 months<\/strong>. Store at temperatures between +5\u00b0C and +35\u00b0C<\/strong>. Accessories: BC SEAL BAND<\/strong>, BC SEAL PAD<\/strong>, WINJOINT FOAM<\/strong>, WINJOINT BAND<\/strong> e WINJOINT SEAL<\/strong>.\r\n\r\n\r\n